When you’d like to spice up an outfit, accessory, luggage piece or even hats you could sew on badges to obtain the fresh look easily. Badges or patches when placed strategically can immediately alter the look of a garment or accessory and take it from boring to spunky within just a few minutes. When you’ve got children and they keep earning badges of merit you would want to sew them on. However, as intimidating as it might sound, sewing on badges is quite easy once you know the way to do it.
To do this approach to sewing on a badge, start by placing the badge on the place in which you want it. Now secure the badge well with a few pins so it stays into position and doesn’t shift when you’re sewing it on. So if you are putting the patch on a garment, you must fix the patch after which you can try the garment on to make certain that the patch or the badge looks right in the place. If your patch requires a little readjustment you can do it at this stage easily.
Now thread the needle being sure that the thread that you are currently using isn’t too long. Maintain the thread within a length of approximately 18inches for simple maneuvering. If the thread is too long then you might get bothered by knots. After you have the thread ready make a knot at the end of the thread. It is possible to thread a needle manually by holding the non knotted end in between your forefinger and thumb and then passing it in the eye of the needle. It’s also possible to take the help of a needle threader if you find threading a needle in this way difficult.
Pass the needle in the badge and also the fabric ensuring that the knot is on the wrong side of the patch. Leave a space of 1/8th of an inch from where you started stitching keeping this distance from your last stitch continually. Continue stitching around the entire perimeter of the badge until you have completely finished stitching it all the way through. Now knot the thread on the underside of the patch by looping your thread by using a single stitch. Pull the thread strongly to secure the knot after which cut off any excess thread which is left. Lastly remove the excess safety pins that you were using to secure the patch in place.
You can also sew on badges by using a sewing machine in case you don’t wish to accomplish the same by hand. Select a thread that matched the hue of your patch and then tread your machine. It’s also possible to choose a contrasting color depending on the look which you want to provide your badge. Once this is achieved you have to start sewing you badge. Utilize the top of the badge for your starting place and sew all along the edge of your badge using the regular stitch mode ending in your kick off point. Once done, cut the excess thread that connects the badge to the machine and your garment is ready for usage with the badge.